DNS usually stands for Domain Name Servers, and its basic function is to load the web pages from the host network. Sometimes when your internet connection or router network is slow, then DNS fails to connect or load the web pages. Thus, your computer screen shows DNS_Probe_Finished_No_Internet error.
If you are one of those users who are facing this issue while working on your computer, then don’t worry because DNS_Probe_Finished_No_Internet Error can be solved easily just by following some methods which we are going to share with you in this article.
Before we discuss ways to fix the DNS_Probe_Finished_No_Internet issue, you must understand why does DNS_Probe_Finished_No_Internet Error happen, so let us take a look at that first.
Why DNS_PROBE_FINISHED_NXDOMAIN Error Occur?
The most obvious and primary reason behind this error is the slow internet that fails to connect or load the site you want to open, or it also can be issues related to DNS settings.
Usually, DNS redirects a specific domain to its respective IP address, and when it fails to do connect it, that is when DNS_Probe_Finished_No_Internet Error Appears. However, whatever the reason is, the misconfiguration of DNS or slow internet connection, it can be resolved with secure methods which we are going to discuss next.
How to Fix DNS_Probe_Finished_NXDomain Error
DNS_Probe_Finished_No_Internet error is mostly observed in Windows 10, Windows 8.1, Windows 7, and even in MACs or Android Phones with Google Chrome.
Method 1: Reset the Winsock Program
This method is the fastest and most efficient that will help you to resolve this issue. It is an effortless method and works in almost every case.
Winsock is a programming interface in your computer, and its primary function is to support those programs in the computer that handle the input and output requests. Thus, any misconfiguration in Winsock can result in DND_PROBE_FINISHES_NXDOMAIN.
Resetting the Winsock is very easy and straightforward so, follow the steps listed below:
Step 1: First of all, press the Windows key and in the search bar type “cmd” then from the options that pop-up, select Command Prompt.
Step 2: Right-click on the command prompt and select Run as Administrator option.
Step 3: Next, type the following command in the Command Prompt and press enter: netsh winsock reset
Step 4: The above command will take some time to process, and then a message will pop-up on-screen on the succession after the process is completed.
Step 5: At last, Restart Your Computer to save the changes you made and then try to surf the internet again using Google Chrome.
Must Check Out:
- Err_Connection_Reset Error in Google Chrome
- Err_Connection_Reset Error in Google Chrome
- ERR_CONNECTION_TIMED_OUT Error in Chrome
- Windows Update Error 0x800705b4
- Application Error 0xc0000142
Method 2: Use Command Prompt
You can flush the DNS settings or renew them by using a number of commands which are available on your computer. This method includes essential and useful commands like one we used in the first method to reset the Winsock. These commands might help you to resolve DNS_Probe_Finished_No_Internet error.
Step 1: Open the start menu, and in the search bar type “cmd” and from the search results Select Command Prompt → right-click on it and then choose Run as Administrator.
Step 2: Next, in the command prompt window type the following commands & press the enter button after each command or you can copy-paste these commands:
ipconfig /release
ipconfig /all
ipconfig /flushdns
ipconfig /renew
netsh int ip set dns
netsh winsock reset
Note:- Remember to run all these commands one by one.
Step 3: Once you have completed the above step, Restart Your Computer, this will save the changes you’ve made.
Step 4: Finally, try to surf the internet using Google Chrome and check if the DNS_Probe_Finished_No_Internet error is resolved or not.
Method 3: Changing the TCP/IP4 Proxy Settings
If the issue is regarding your internet connection or its network settings, then resetting the TCP/IP4 Proxy settings might help you to fix this error.
Step 1: Right-click on the Windows button and then select the Network Connections option.
Step 2: Next, in the network connections window right-click on your Active Network, the one you are currently using and then navigate to its Properties.
Step 3: Then, you will be redirected to a new window showing you the list of options. Find and select Internet Protocol Version 4 and then click on the Properties button, you can find it situated at the bottom right.
Step 4: After that in the new window that will open, check the use below preferred and alternate DNS addresses and then enter the given DNS settings in it:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
Then press the OK button and save the settings.
Method 4: Reset Chrome Flag Settings
This method is a rapid and easy solution that can help you to resolve DNS_Probe_Finished_No_Internet error. To try this method, follow the steps provided below:
Step 1: At first, open the Google Chrome and then type the following URL in the address bar: chrome://flags/
Then hit the enter button and wait for some time to load the page with settings.
Step 2: Next, find and click on the Reset all to the default option on the right side of the settings page.
Step 3: At last, save all the changes you have made and then try to surf the internet to check whether the error has been resolved or not.
Method 5: Restart the DNS Client
The latter method is Restarting your DNS client. This method is last, but it is not the least; in fact, this method is proven useful and will indeed help you to resolve DNS issues you are facing.
You can use the steps given below to try out this method:
Step 1: First of all, press the Ctrl + R key combination. This will open the Run command on your computer.
Step 2: Next, in the run dialogue box type “services.msc” and click OK.
Step 3: You will be redirected to a new window with the list of services, scroll down through the list, and find the service named DNS Client.
Step 4: When you find the DNS Client service, right-click on it, and then click on the Restart Option.
Step 5: The DNS Client Service will restart, so wait for some time and until the process is completed.
Step 6: Once the restart process is done, try to surf the internet connection to check if the error is solved or not.
Read More:
- Microsoft Compatibility Telemetry High Disk Usage in Windows 10
- No Sound Output Device Installed Error in Computer
- Error Code: 0x80070005 – Windows 10 Update Error
- VAC Was Unable to Verify the Game Session in CS:GO
- ERR_NAME_NOT_RESOLVED Error in Chrome
Conclusion
So, these were the 5 most useful and efficient methods that you can use to resolve or fix the DNS_PROBE_FINISHED_NXDOMAIN error on your windows chrome browser. The methods we discussed in this article can be used in other operating systems such as MAC and on different browsers also. Always remember to follow the methods one by one, to avoid further problems.
The post DNS_Probe_Finished_No_Internet Error [RESOLVED] appeared first on HowAndWow.Info.